Edge Floor Sander
The Hiretech HT7-2 is a heavy-duty disc floor edger designed for sanding floor edges, stairs, closets, and hard-to-reach timber surfaces. It features a high-speed motor and a four-brush electrical design to deliver smooth finishes right up to skirting boards and baseboards. The machine is commonly used in residential floor restoration, commercial timber refinishing, and deck sanding projects alongside main drum sanders.
Features
- Precision-machined aluminum sanding disc guard for flush sanding against edges
- High-output universal motor for consistent sanding performance
- Built-in dust extraction system with a multi-vane vacuum fan and cloth dust bag
- Non-marking polyurethane wall guard ring to prevent damage to baseboards and walls
- Ergonomic handle grips for precise directional control
- Heavy-duty duty power cable and strain relief system
- Uses standard 178 mm (7-inch) stick-on or clamp-on sanding discs
Uses
- Sanding floor edges, borders, and corners flush with walls
- Sanding wooden stair treads and risers
- Sanding inside closets, hallways, and narrow doorways
- Removing old paint, varnish, stain, and sealer from timber edges
- Levelling timber board joints near perimeter walls
Specifications
- Disc Diameter: 178 mm (7 inches)
- Disc Speed: 3,300 rpm
- Motor Power Output: 0.9 kW (1.2 HP)
- Operating Voltage: 230 V
- Current Draw: 4.5 A
- Power Source: Single Phase Electric
- Overall Length: 370 mm
- Overall Width: 315 mm
- Overall Height: 400 mm
- Weight: 16.3 kg
- Noise Level: 92 dB(A)
Transport Requirements
- Suitable for transport in a ute, van or small trailer.
Recommended PPE
- Steel-capped boots
- Respiratory protection
- Hearing protection
- Eye protection
- Gloves
Optional Attachments
- Sanding discs (various grit grades)
- Heavy-duty extension leads
